special hydraulic press SMC composite hot pressing

HRR Series Hydraulic host machine and the use of four-column and frame of body structure, to ensure that between the ram and the table (that is, top mould and bottom mould) in parallel with high accuracy and vertical accuracy of the process of repression;[more]

special hydraulic press for burglarproof door

HRF series of hydraulic press has two kind of structures with three-beam many columns and wide frame structure, has a good orientation to maintain performance and accuracy, and the main cylinder uses two-cylinder or the multi-cylinder arrangement form...[more]

special hydraulic press for friction material

HRM series hydraulic press for molding friction materials of special equipment, host for the four-column and frame-type two kinds of structures, machines using finite element analysis, structural optimization of reasonable strength, and deformation of small, so that more sophisticated machines, higher safety factor. [more]

Electric motor cast aluminum hydropress series

The aluminum-injected fluid drive(also the die caster) adopts the manual filling of aluminum and fan blade inlet of aluminum as controlled by the PC programming controller. It has three word orders of spot moving,manual and senti-auto...[more]

Series of horizontal stator hydropress

Series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing. This machine uses horizontal structure and has solved the problem that the motor stator horizontal pressing is unstable.[more]

Y35 electric motor press mounting machine series

Widely used for pressing of the large-and middle type motor, rotor and stator and placing and forming of the stator silicon steel sheet and the pressing, pressed drawing out extension and forming of the large pieces.[more]

Electric motor cramp seies

These machines are suitable for rising the localization of core tightly compressing tightly and deducting one sheet of the electrical machinery stator iron. These opertions are semi-automatical.[more]

Bearing press mounting machine series

The special-purpose liquid press of bearing adopts the stencil plate to weld for PD014 series electrical machine dispel the stress, the hydraulic pressure systems are all sealed in the fuselage.[more]

Y41 Series Single Column Arber Hydraulic Press

Type Y41 Series Single Column Arber Hydraulic Press is a kind if medium-small hydraulic press with multi-functions suitable for the calibration of the parts like bearings and moulding materials and for the arber of parts like bearings and sleeves...[more]

YW41 series hydraulic stretcher

This series of hydraulic stretcher is specially used for calibrating and press-fitting of the parts of axial and axie sleeve varieties, and for shaping, punchine and embossing of relative components...[more]